1 / 3
Fly in Beautiful Sky
2 / 3
A320
3 / 3
A320 Neo

COMMUNICATIONS



Airbus A320
COMMUNICATIONS

(* Please refer Latest A320 FCOM . If any suggestion send us in comment Box)
(Smart Aviators Android App and Mobile users please swipe left or right for next topic)


1)       RMP #2 is dedicated to which VHF radios?
·         VHF 1 and 2.
·         VHF 2 only.
·         VHF 1 and 3.
·         All radios.

2)       On RMP, the ON/OFF switch controls:
·         The power supply to the RMP.
·         Only the STBY NAV function of the RMP.
·         Only the COM function of the RMP.

3)       When selecting the guarded RMP NAV key:
·         Manual tuning via the MCDU RAD NAV page is still possible.
·         Manual tuning via the MCDU RAD NAV page is always possible.
·         FMGC auto tuning is inhibited.
·         Manual tuning via the MCDU RAD NAV page is only possible on the offside radio.


4)       If an RMP fails, the selected receiver is no longer controlled by this RMP and frequencies and bars disappear from this RMP.
·         True.
·         False.

5)       If VHF 1 is selected on RMP 2, SEL light illuminates Amber:
·         On RMP 2.
·         On RMP 1.
·         On RMP 1 and 2.
6)       When the ON VOICE key on an Audio Control Panel is pushed in; ADF and VOR ident signals are inhibited.
·         True
·         False

7)       HF transmission is inhibited on ground; GND HF DATALINK is kept at override position so that after touchdown ACARS keep running
·         True
·         False

8)       The audio management system allows the flight crew to use:
·           All the radio communication and radio navigation facilities installed on the aircraft in transmission and reception mode.
·          The interphone system.
·           The call systems and Passenger Address (PA) system.
·           All of the above.

9)       How can you get the mechanics attention when he is outside the aircraft?
·           Use the MECH pushbutton on the CALLS panel which sounds an external horn.
·           Hold the PA button
·           Select the MECH transmission key on the ACP
·           Select the MECH transmission key on the ACP and hold the pushbutton for 2 seconds

10)   If the VHF 3 transmission key illuminated amber showing the word "CALL"
·           An ACARS message is waiting.
·           Indicates a SELCAL
·           The N°1 flight attendant is calling
·           ATC is calling

11)   RMP #1 is dedicated to which VHF radios?
·           VHF 1 and 2.
·           VHF 2 and 3.
·           VHF 1
·           All radios.

12)   On RMP, the ON/OFF switch controls:
·           The power supply to the RMP.
·           Only the STBY NAV function of the RMP.
·           Only the COM function of the RMP.

13)   You can tune the ILS receivers to different channels.
·           Yes.
·           No.

14)   If you depress the guarded NAV button, the MCDU RAD NAV pages are inhibited and the RMP controls navaid tuning.
·           True.
·           False.

15)   Which ACP switch configuration is correct for communication with other cockpit crew members while wearing your Oxygen Mask?
·          ACP INT/RAD switch selected to INT, INT reception knob on, loud speaker volume up.
·          INT transmission key to on, INT reception knob on, use the sidestick push-to-talk when speaking, loud speaker volume up.
·         Both are correct.

16)   The AUDIO SWITCHING rotary selector allows replacement of a failed ACP #1 or #2 with ACP #3.
·           True.
·           False.

17)   Which statement is correct regarding the cockpit voice recorder?
·           Is automatically energized when the battery pb\'s are selected on.
·           Is always active after DC electrical power is applied to the aircraft.
·           Is automatically energized when the parking brake is set.
·           Is automatically energized after the first engine start or five minutes after AC electrical power is applied to the aircraft.

18)   How do you erase the CVR?
·           Press the CVR ERASE pushbutton when the aircraft is on the ground with the parking brake set.
·           Press the CVR ERASE pushbutton for 2 seconds when the aircraft is on the ground with the parking brake set
·           Press the CVR ERASE pushbutton and CVR TEST pushbuttons for 2 seconds simultaneously.
·           Press the CVR ERASE pushbutton and CVR TEST pushbuttons for 2 seconds simultaneously (with the parking brake set).

19)   On the ground, CVR is stopped automatically ______ after the last engine shutdown.
·           Immediately
·           1 minute
·           3 minutes
·           5 minutes.

20)   On the ground, the crew can energize the CVR manually by pressing the GND CTL pushbutton.
·           True.
·           False.

21)   Only the last 60 minutes of recording are retained by the CVR.
·           True.
·           False.

22)   To make a PA announcement:
·           Depress and hold the PA transmission key push button.
·           Use the pedestal mounted headset
·           Both are correct.

23)   The service interphone has ______ interphone jacks and an OVRD switch located on the overhead panel.
·           Five
·           Seven
·           Eight
·           Ten

24)   When selecting the guarded RMP NAV key:
·           Manual tuning via the MCDU RAD NAV page is still possible.
·           Manual tuning via the MCDU RAD NAV page is always possible.
·           FMGC auto tuning is inhibited.
·           Manual tuning via the MCDU RAD NAV page is only possible on the offside radio.

25)   If an RMP fails, the selected receiver is no longer controlled by this RMP and frequencies and barsdisappear from this RMP.
·           True.
·           False.

26)   You receive a SELCAL on VHF 2, what happens on your ACP?
·           Amber sign call flashes on VHF 2 key.
·           Three green bars come on.
·           White SELCAL appears on VHF 2 pushbutton and VHF 2 reception selector illuminates white.
·           All of the above.

27)   If VHF 1 is selected on RMP 2, SEL light illuminates white:  (wrong question)
·           On RMP 2.
·           On RMP 1.
·           On RMP 1 and 2.

28)   In case of RMP 2 failure, VHF 2 is lost.
·           True.
·           False.

29)   When looking at either RMP, how is it possible to determine if an RMP is selected to a VHF system it isnot dedicated to?
·           The white SEL light will be illuminated on both RMP\'s. This is a normal occurrence in-flight.
·           The white SEL light is illuminated on the offside RMP.
·           The white SEL light is illuminated on the onside RMP.

30)   If RMP navigation tuning is currently in use for VOR tuning and ATC assigns a new communication frequency, what must be done?
·           The NAV key must be deselected and then press the transfer key.
·           Tune the new frequency on the offside RMP.
·           Select the appropriate VHF communication radio transmission key, tune using the rotary selector, press the transfer key.

31)   When the aircraft is in the Emergency Electrical Configuration:
·           RMP's 1 and 2, and ACP's 1 and 2 are both operative.
·           RMP 1 and ACP's 1 and 2 are operative.
·           RMP 1 and ACP 1 are operative.
·           RMP 2 and ACP's 1 and 2 are operative.

32)   With the AUDIO SWITCHING knob in the CAPT3 position, the Captain uses his acoustic equipment onACP3.
·           True.
·           False.

33)   To communicate with a mechanic for manual start valve operation at the engine:
·           Select the INT/RAD selector to INT, and INT audio selector on.
·           Select the transmission key push button labeled INT and the INT audio selector.
·           Select the transmission key push button labeled CAB and the audio selector labeled CAB. 

34)   The flashing amber MECH light indicates that the interphone system is faulty.
·           True.
·           False.

35)   What is the function of the Guarded EMER push button on the overhead panel?
·           To alert ATC of an in-flight emergency.
·           To alert the aft flight attendants of a routine need to speak to them.
·           To alert all flight attendants of a pending urgent need to speak to them.

36)   Which ACP transmission key will illuminate if the flight attendants are calling the cockpit?
·           PA.
·           CAB.
·           ALERT.
·           VHF3.

37)   Is STBY/NAV tuning possible on RMP 3.
·           Yes.
·           No.

38)   Normally how should you call a Flight Attendant?
·           By his or her firstname.
·           Using the ACP CAB pb.
·           Using an overhead FWD or AFT call pushbutton.
·           Selecting the ATTND ADV pushbutton on.

39)   The BFO key enables the beat frequency oscillator for listening to the ID signal.
·           True.
·           False.

40)   Pressing the _____ key, on the audio control panel, allows the crew to inhibit the audio navigation signals.
·           VOICE
·           RESET
·           ATT
·           BFO

41)   If ATC mode selector is at AUTO:
·           Selected ATC operates only in flight.
·           Selected ATC operates when FLEX or TOGA power is selected for takeoff.
·           Selected ATC operates as soon as one engine is running.

42)   On ATC Control Panel, the FAULT light comes on if:
·           Selected Transponder fails.
·           System 1 or 2 has failed.

43)   In case of dual FMGC failure selection of radio navigation frequencies is possible with:
·           RMP 1 only.
·           RMP 1 and 2 only.
·           RMP 1, 2 and 3.

44)   All communications radios are controlled:
·           From the audio control panels (ACPs)
·           By the F/O
·           From any one of the three radio management panels (RMPs).

45)   Only ____ is functional in the emergency electrical configuration.
·           RMP 3
·           RMP 1
·           RMP1 and 3

46)   The Cockpit Voice Recorder will record:
·           Direct conversations between crewmembers.
·           All aural cockpit warnings.
·           Communications over radio and intercom.
·           Passenger address system announcements (as long as one PA reception knob is selected on).
·           All of the above

47)   The cockpit voice recorder will automatically operate on the ground for _______ minutes after electrical power is supplied to the airplane; or when at least _______ engine is operating.
·           6 - 2
·           5 - 1
·           5 - 2
·           4 – 1

48)   When using the boom mike, oxygen mask mike, or hand mike: the PA key must be pressed and held to use the aircraft PA system.
·           True
·           False

49)   When the ON voice key on an Audio Control Panel is pushed in; ADF and VOR ident signals are inhibited.
·           True
·           False

50)   With the INT/RAD switch of an Audio Control Panel (ACP) in the INT position and the sidestick Transmit Switch in the Transmit position, you are transmitting on the:
·           Intercom at all times.
·           Radio selected by the transmission switch on the Audio Control Panel.
·           Radio selected by the reception knob on the Audio Control Panel.

51)   To transmit and receive on the service interphone, the pilot must select the:
·           CAB reception knob and the ATT transmission key on the ACP.
·           CAB reception knob and the MECH transmission key on the ACP.
·           Service Int on the nose gear panel.

52)   Illumination of the SEL indicator on a Radio Management Panel indicates:
·           The RMP has failed.
·           The VHF has failed.
·           The RMP is being tuned to a transceiver from another RMP.

53)   When would a green AM light illuminate on RMP 1?
·           Would not illuminate
·           If AM mode is required and crew has selected HF1 and AM
·           If crew has selected HF1 and single side band mode
·           If AM mode is required and crew has selected HF 2 and AM

54)   A VOR is tuned on RMP 1 using the STBY NAV function. Can this selection be seen on the MCDU RADNAV page?
·           No. Information on RAD NAV page is not available when the NAV pb on RMP is pressed.
·           Yes. Information on RAD NAV page is always available.
·           No. It is not possible to tune a VOR using STBY NAV function.
·           Yes. MCDU RAD NAV page shows VORs tuned using STBY NAV function.

55)   Is it possible to tune a navaid with the STBY NAV function on RMP 3?
·           Yes
·           No. STBY NAV function is not available on RMP 3
·           No. RMP 3 is not available for crew use.
·           Yes but only on the ground.

56)   How can a navaid tuned through the STBY NAV on RMP 1 or 2 be identified?
·           The ident appears on the ND
·           By pressing out the corresponding reception knob on the ACP
·           All of the above.

57)   If an RMP fails:
·           The selected receiver is no longer controlled by this RMP
·           The frequency displays disappear
·           The green VHF or HF lights go out
·           All of the above.

58)   With the MECH transmission key on the Audio Control Panel pressed:
·           The flight interphone channel is selected for transmission via the ACP RAD switch or the side stick radio selector.
·           The cabin interphone channel is selected for transmission via the ACP RAD switch
·           You can speak to the ground mechanic via the handset
·           The mechanic will hear the external horn sound.

59)   How could you receive ATIS information from a VOR?
·           Pressing the ON voice key on the ACP
·           Pressing and releasing out the VOR reception knob and selecting the ON voice key on the ACP
·           Voice facility is not available through the ACP
·           None of the above.

60)   How do you cancel the ON VOICE green light?
·           By depressing the on voice p/b
·           By pressing in the VOR reception knob
·           By pressing in twice the VOR reception knob
·          By depressing the VOR reception knob.





----------------------------------www.smartaviators.com-------------------------------

For Latest Updates please Download our Smart Aviators Android App.


Please click on above link to download the App.





* Instructions for installation
1. Click on Smart Aviators link and Open with Google Drive.
2. Download the App in .apk extension file.
3. Find the setup file (Smart Aviators App.apk) in download folder of your phone or Tablet.
4.Open this file.
5. For Security Permission open settings then click on Unknown sources.
6. Now Click on INSTALL.
7. ENJOY Learning. 







1 comment: